Linux 2.6.16-gentoo-r2 x86_64 AMD Athlon(tm) 64 Processor 3400+ GNU/Linux

2、硬件设备

波乐 5188 USB CDMA 1x Moderm， 联通新时空卡

3、需要软件：ppp wvdial

安装过程：

安装软件

修改用户组

运行配置生成文件

#wvdialconf /etc/wvdial.conf

Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S2 S3
ttyACM0<*1>: ATQ0 V1 E1 -- OK
ttyACM0<*1>: ATQ0 V1 E1 Z -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyACM0<*1>: Modem Identifier: ATI -- ERROR
ttyACM0<*1>: Speed 4800: AT -- OK
ttyACM0<*1>: Speed 9600: AT -- OK
ttyACM0<*1>: Speed 19200: AT -- OK
ttyACM0<*1>: Speed 38400: AT -- OK
ttyACM0<*1>: Speed 57600: AT -- OK
ttyACM0<*1>: Speed 115200: AT -- OK
ttyACM0<*1>: Speed 230400: AT -- OK
ttyACM0<*1>: Speed 460800: AT -- OK
ttyACM0<*1>: Max speed is 460800; that should be safe.
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
Found an USB modem on /dev/ttyACM0.
/etc/wvdial.conf<Warn>: Can't open '/etc/wvdial.conf' for reading: No such file or directory
/etc/wvdial.conf<Warn>: ...starting with blank configuration.
Modem configuration written to /etc/wvdial.conf.
ttyACM0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"

修改配置文件

#nano -w /etc/wvdial.conf

4、使用说明

#modprobe ppp
#wvdial
看到的结果如下：
--> WvDial: Internet dialer version 1.56
--> Cannot open /dev/ttyACM0: Input/output error
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
CONNECT
--> Carrier detected. Waiting for prompt.
~[7f]}#@!}!}!} }=}!}$}%j}"}&} } } } }#}%B#}%}%}&} oOb}'}"}(}"Hn~
--> PPP negotiation detected.
--> Starting pppd at Fri Apr 21 17:34:53 2006
--> Pid of pppd: 11116
--> Using interface ppp0
--> pppd: 5+
--> pppd: 5+
--> pppd: 5+
--> pppd: 5+
--> local IP address 220.205.12.112
--> pppd: 5+
--> remote IP address 220.192.8.6
--> pppd: 5+
--> primary DNS address 220.192.8.58
--> pppd: 5+
--> secondary DNS address 220.192.32.103
--> pppd: 5+Linux联盟收集整理

频道声明：本频道的文章除部分特别声明禁止转载的专稿外，可以自由转载.但请务必注明出出处和原始作者 文章版权归本频道与文章作者所有.对于被频道转载文章的个人和网站,我们表示深深的谢意。 原始作者:佚名 录入时间:2007-1-3 3:56:12 信息来源:不详 投稿信箱:itqoo@126.com